4G (LTE) Long Term Evolution Uplink
From Signal Identification Wiki
| Cellular | |
|---|---|
| 1G: AMPS - NMT 2G: GSM - D-AMPS - 2G CDMA (IS-95) |
| | |
|---|---|
| Frequencies | 700 MHz,800 MHz,900 MHz,1700 MHz,1900 MHz,2500 MHz,3500 MHz |
| Frequency Range | 700 MHz - 3500 MHz |
| Mode | SC-FDMA |
| Modulation | QPSK,16QAM,64QAM |
| ACF | — |
| Emission Designator | — |
| Bandwidth | 5 MHz,1.4 MHz,3 MHz,10 MHz,15 MHz,20 MHz |
| Location | Worldwide |
| Short Description | Acquired via telecommunications carrier hardware during interference investigation of an Australian cellular network. |
| I/Q Raw Recording | Download file |
| Audio Sample | |
Samples[edit]
| 10 MHzMegaHertz (MHz) 10^6 Hz data download | 10 MHzMegaHertz (MHz) 10^6 Hz data upload | 10 MHzMegaHertz (MHz) 10^6 Hz VoLTE call |
|---|---|---|
| IQQuadrature signals form the basis of complex RF signal modulation and demodulation, both in hardware and in software, as well as in complex signal analysis.: File:LTEuplink download.zip | IQQuadrature signals form the basis of complex RF signal modulation and demodulation, both in hardware and in software, as well as in complex signal analysis.: File:LTEuplink upload.zip | IQQuadrature signals form the basis of complex RF signal modulation and demodulation, both in hardware and in software, as well as in complex signal analysis.: File:LTEuplink call.zip |
Frequencies[edit]
700MHz, 800MHz, 900MHz, 1700MHz, 1900MHz, 2500MHz, 3500MHz