Heater Fan LCD display interference

From Signal Identification Wiki
Jump to: navigation, search
Heater Fan LCD display interference
Frequencies 120-130 Mhz"-130Mhz" is not declared as a valid unit of measurement for this property.
Frequency Range 0 HzHertz (Hz), unit of frequency, defined as one cycle per second (1 Hz).kHzKiloHertz (kHz) 10^3 Hz
MHzMegaHertz (MHz) 10^6 Hz
0 HzHertz (Hz), unit of frequency, defined as one cycle per second (1 Hz).kHzKiloHertz (kHz) 10^3 Hz
MHzMegaHertz (MHz) 10^6 Hz
Mode AMAmplitude Modulation
Modulation Pulse
Bandwidth AMAmplitude Modulation band (peaks only)"AMAmplitude Modulation band (peaks only)" is not a number. kHzKiloHertz (kHz) 10^3 Hz
MHzMegaHertz (MHz) 10^6 Hz
kHzKiloHertz (kHz) 10^3 Hz
MHzMegaHertz (MHz) 10^6 Hz
Location
Short Description For use to display the LCD numbers either on a digital clock, or an outlet powered device that uses LCD's.
I/Q Raw Recording
Audio Sample

This page may have issues. Will be edited shortly...


Samples[edit]

http://www.sigidwiki.com/wiki/File:LCD_interference.wav

Frequencies[edit]

120, 130 MHzMegaHertz (MHz) 10^6 Hz, appears as peaks throughout the band

Additional Images[edit]

http://www.sigidwiki.com/wiki/File:Heater_Fan_LCD_display_interference.PNG

File:Heater fan LCD.PNG