Amplitude Modulation Signalling System (AMSS)

From Signal Identification Wiki
Jump to: navigation, search

Amplitude Modulation Signalling System (AMSS)
AMSS.jpg
Frequencies 30 MHz,100 kHz
Frequency Range 100 kHz - 30 MHz
Mode SSB
Modulation AM,PSK
ACF
Emission Designator
Bandwidth 200 Hz
Location
Short Description Amplitude Modulation Signalling System (AMSS) is a DRM-based radiotext and data technology for AM broadcasting, like RDS that is used for FM. It transmits as a subcarrier, phase-modulating the carrier frequency.
I/Q Raw Recording Download file
Audio Sample

Amplitude Modulation Signalling System (AMSS) is a DRM-based radiotext and data technology for AMAmplitude Modulation broadcasting, like RDS that is used for FM Radio. It transmits as a subcarrier, phase-modulating the carrier frequency. This system was standardized by ETSIEuropean Telecommunications Standards Institute. An independent, not-for-profit, standardization organization in the telecommunications industry in Europe, developing global telecommunications standards. under ETSIEuropean Telecommunications Standards Institute. An independent, not-for-profit, standardization organization in the telecommunications industry in Europe, developing global telecommunications standards. TS 102 386 (based on ITU BS.706)

AMSS is designed to ease the transition from analogue to digital radio. It allows limited additional service information features to be provided to analogue listeners (for example, assisted re-tuning) in order to give them a taste of the full enhancements provided by digital broadcasting (for example, greatly improved audio quality). Further, it assists DRM receivers equipped with AMAmplitude Modulation decoders with AMSS to find DRM transmissions of the same service in the same area or when the receiver is moved to a new area.


Characteristics[edit]

AMSS transmits as a subcarrier, phase-modulating the carrier frequency. AMSS is modulated onto the AMAmplitude Modulation carrier in a way that the signal is barely audible on a standard receiver.

It uses the same data format as used in DRM for station identification.

Samples[edit]

Frequencies[edit]

AMSS is designed to be used on longwave, shortwave and medium wave bands AMAmplitude Modulation broadcast channels

Decoding Software[edit]

Additional Links[edit]

Additional Images[edit]